This article is automatically translated from Russian by Google Translator.
To work with the LEGO NXT controller, in the TRIK Studio settings, go to "Robots" and select the LEGO NXT platform.
There are several options for running programs for the LEGO NXT controller:
Step-by-step interpretation of the diagram with a simulation of the robot's behavior on a 2D model.
Step-by-step interpretation of the diagram with sending commands to the robot via Bluetooth or USB.
Download the program to the robot and then execute it autonomously without communication with a computer.
.In 2D robot model mode, commands are not sent to the robot but are executed step by step for the virtual model displayed on the screen. See the article "2D Model" for details.
1. Turn on the two-dimensional model mode.
2. Click the "Execute" button.
3. The 2D model window will open and the program will start.
4. When you switch to edit mode, you can track the steps of the program's execution.
1. Enable "Interpret (USB)" or "Interpret (Bluetooth)" mode.
2. Click the "Execute" button.
From TRIK Studio you can download a ready-made program to the robot to execute it autonomously in the future without communication with a computer.
The section is being supplemented.
