Object «gamepad»
Last updated
Last updated
This article is automatically translated from Russian by Google Translator.
Serves to work with the programmable control panel "TRIK Gamepad".
Sent when the user has pressed one of the five buttons at the bottom of the remote control.
Returns true
if a button with the specified number was pressed on the remote control. Resets the memorized press for this button.
As a parameter, you must specify the number of the button - from 1 to 5.
Sent when the remote control is connected to the robot.
It is sent when the remote control is turned off.
Returns whether the control area on the remote control is currently pressed. The control areas are numbered 0 and 1.
As a parameter, you must specify the number of the control area - 0 or 1.
Sent when the user taps or moves their finger over the control area on the remote.
If the specified control area on the remote is pressed, returns the current x-coordinate of the press.
As a parameter, you must specify the number of the padId
control area.
If the specified control area on the remote is pressed, returns the current y-coordinate of the press.
As a parameter, you must specify the number of the padId
control area.
Sent when the user moves his finger away from the control area with the specified number.
Parameters:
padId
— control area number.
x
, y
— the coordinates of the last known click from -100 to 100. The coordinate (-100, -100) corresponds to the upper left corner of the control area.
Resets the memorized events from the remote control.
If "steering" (events from the device's accelerometer) is enabled on the remote control, it returns the current remote control tilt.
Tilt is coded from -100 to 100, with -100 being the leftmost "rudder" position and 100 being the rightmost position.
Sent when the remote control has the "steering wheel" (events from the device's accelerometer) on and the user has turned the device.
As a parameter it is necessary to specify a number from -100 to 100, -100 corresponds to the leftmost position of the "rudder", 100 - to the rightmost position.
Method
Description
Returns true
if a button with the specified number was pressed on the remote control.
Returns whether the control area on the remote control is currently pressed.
If the specified control area on the remote is pressed, returns the current x-coordinate of the press.
If the specified control area on the remote is pressed, returns the current y-coordinate of the press.
Sent when the user moves his finger away from the control area with the specified number.
Resets the memorized events from the remote control.
If "steering" (events from the device's accelerometer) is enabled on the remote control, it returns the current remote control tilt.
Sent when the remote control has the "steering wheel" (events from the device's accelerometer) on and the user has turned the device.
Signal
Description
Sent when the user has pressed one of the five buttons at the bottom of the remote control.
Sent when the remote control is connected to the robot.
It is sent when the remote control is turned off.
Sent when the user taps or moves their finger over the control area on the remote.